These devices simulate the water and allow water to be circulated in the aquarium which helps provide oxygen to the fish and invertebrates
Wavemakers are basically water surge devices that are used in aquariums to produce waves that are similar to that of seas and oceans
●Please confirm that the voltage and frequency of the power are up to the specifications marked on the nameplate of the product before using this product.
●The installation position of the plug for this pump should be higher than the max. water-level of the aquarium, or let the power wire downwards and then let it upwards before connecting to the socket to prevent water from flowing into the socket via the wire and result in an accident of electrical leakage.
●Install the rubber acetabula on the base of the pump. Then properly place the pump on the bottom or wall of the aquarium, slightly press the pump, and it will be firmly fixed. Or the pump can be hung on the end of the aquarium with a fixing bar. Also, you can use the magnet base to locate this pump in a proper position.
●If the pump is not in use for a long time, remove it out of water wipe it dry and store it in a cool and dry place for future use.
|Suitable for Water level
|Voltage: 220-240V Frequency: 50/60Hz
|Not suitable for 110V electricity supply. You need to buy a VOLTAGE CONVERTER 110V TO 220V TRANSFORMER