DIY Co2 Tuning Valve

Co2 Fine-Tuning Valve Control Valve DIY with The Adjustment Co2 Homemade Regulating Valve

  • ​It’s connected in series with the adjustment CO2 generator valve to increase the accuracy of the adjustment and can also be used as a switch directly.
  • This product can be used to adjust the gas output in cylinders and disposable carbon dioxide equipment.
  • It’s used in a cylinder or in a DIY generator to control two gas pipes.
  • Suitable for 6mm PU hose.
  • Can be used to adjust the volume of the gas in the DIY equipment.
 

රු650.00

2 in stock

or 3 X රු 216.67 with Koko Koko
Category: Product ID: 6287

Description

DIY Co2 Tuning Valve Suitable for 6mm PU hose. Can be used to adjust the volume of the gas in the DIY equipment. It’s used in a cylinder or in a DIY generator to control two gas pipes. This product can be used to adjust the gas output in cylinders and disposable carbon dioxide equipment. It’s connected in series with the natural adjustment CO2 generator valve to increase the accuracy of the adjustment and can also be used as a switch directly.

Specification:

  • Condition:100% Brand New
  • Material: Plastic
  • Color: White or Black
  • Size: Two interface distance: Approx.52mm/2.05inch

Package List:
1*DIY Co2 Tuning Valve

 

NOTE:-
There is a small skill to adjust the size of the gas output. It is difficult to adjust from large to large because the air pressure needs to be transmitted in the hose, which will cause a delay. First, tighten the trim valve, and then stop the gas. Then slowly unscrew the trim valve, which makes it a lot easier to adjust.

The product has a separate air inlet and outlet, pay attention to the arrow logo.

Additional information

Weight0.200 kg

Reviews

There are no reviews yet.

Be the first to review “DIY Co2 Tuning Valve”

Your email address will not be published. Required fields are marked *

0% Interest

Installment Plans

For Your VISA & Master Credit Cards

This will close in 20 seconds